How to notice and fix drafts in your home

A draft is a movement of air through a small opening that should be closed: beside a door, around a window sash, through a ceiling fitting or along a skirting board. It can be obvious on a windy day, yet appear only when heating, cooling or an exhaust fan switches on. The useful first step is to identify the airflow, rather than immediately covering every gap with sealant.

Australian homes experience a wide range of conditions. Melbourne’s Southerly Buster can reveal weak seals, Brisbane’s summer storms can expose roof and flashing problems, and Sydney’s coastal gusts can push air through tired window edges. Air-conditioning in a western Sydney terrace or a high-rise apartment can also create pressure differences around internal doors. These are different problems, so one pack of foam or a closed-off vent is rarely the right answer.

Start with a room-by-room check and keep a brief record of the weather and time of each test. Separate comfort issues from safety issues: required ventilation and fire protection must keep working, and apartment tenants should consult their property manager before changing doors, windows or shared services. A useful approach suits owners and renters alike: observe quietly, test simply, then choose the least disruptive repair.

Find the source before buying a product

Close the window and switch off any nearby ceiling or extraction fan, then hold a strip of tissue near likely gaps. Moving air is easier to feel when background airflow is reduced. Check the top and sides of external doors, the meeting rails of sliding windows, keyholes, letterboxes and the edges of ceiling vents. Mark the direction of movement rather than simply noting that the room feels cold.

Repeat the test at different times of day. A gap may leak cold air when the wind rises, while warm air escapes elsewhere and pulls outdoor air through another opening. In an apartment, the source may be a shared stairwell door, a balcony door seal or ductwork connected to the building rather than a window in the room. If the tissue moves strongly toward you with no open window nearby, investigate ventilation before sealing anything.

When seeking quotes, give the tradesperson the room, airflow direction and basic measurements instead of unnecessary personal information. If a service request also involves online payment, checking for data leaks is a sensible precaution before entering card details on an unfamiliar website.

Check doors, windows and surrounding walls

For an external door, try a brush sweep or flexible draught excluder after checking that the door closes fully and the latch engages. Adjust a loose hinge or strike plate where possible. Do not seal a fire door with ordinary foam, and avoid a raised threshold that creates a trip hazard. In a rental, ask the agent before drilling or attaching hardware.

For windows, clean the sash tracks, examine the rubber or brush seals and check that locks pull the sashes together. Salt-laden air along the Sydney coast can harden rubber, so flexible strips may need replacing rather than painting over. For a chronically cold single-glazed window, secondary glazing or a double-glazed replacement can reduce heat loss more effectively than perimeter tape, provided it is installed correctly. The same inspect-before-replace habit applies across a household: guidance on maintaining your bicycle shows how regular cleaning and basic checks can catch wear before it becomes a failure.

On walls, inspect service penetrations and missing switch plates, but leave vents, gas-flue exits and required building openings alone. Australian hardware counters stock brush seals, silicone, foam and draught excluders in metric sizes; take the frame profile with you rather than guessing from the gap width. Ask staff to match the product to the surface and gap, not merely the material.

Tell a draft apart from a ventilation fault

Most drafts are small and predictable, but airflow linked to fans, gas appliances or persistent odours needs a different response. Before closing a vent, note whether air is entering, leaving or circulating. Never block a fireplace, combustion-air opening or required exhaust, and do not alter a fire door without approved fittings.

What you notice Likely explanation Sensible first checks
Air moves near a closed window or door Wind or pressure difference passing through a gap Test the frame edges, sash seals, sweep and latch
Air pulls from a ceiling grille when a fan starts Airflow imbalance, disconnected ducting or a faulty damper Check filters, accessible duct joints and grille movement
A cold pane develops condensation Moisture meeting a poorly insulated or leaky surface Inspect seals, manage indoor humidity and identify persistent glazing problems
Odour, stuffiness or fumes persist near an appliance Inadequate or blocked ventilation Stop using a suspect combustion appliance and contact a licensed fitter

Persistent airflow at a ceiling grille can indicate disconnected ducting, a dirty filter or a damaged backdraft damper. Seal accessible duct joints with an appropriate product, but call a licensed HVAC technician for concealed ductwork. If a gas appliance is involved, stop using it until a licensed fitter has checked the flue and ventilation. Keep working carbon-monoxide alarms in place wherever fuel-burning appliances are used.

Match the repair to the building

A cool patch near a ceiling fitting may be an air leak, but water entry needs attention first. After heavy rain in Brisbane, have roof tiles, valleys and flashings checked before filling cracks in the ceiling. Water stains, mould or a musty smell call for moisture diagnosis rather than a cosmetic cover-up.

Use materials designed for each surface. Flexible seals suit movable window edges, while durable brush or rubber suits many doors. Around ceiling penetrations, use only products rated for the location, including fire and temperature requirements, and avoid blocking downlight housings. Do not drill into an older ceiling that may contain asbestos; have a professional assess it first.

For ductwork and fans, check accessible connections, grilles and damper movement before buying sealant. Duct mastic is more suitable than ordinary tape for many joints, while flexible duct needs proper support. Electrical changes, roof access and gas connections are specialist work. Get written approval where a landlord, strata body or building warranty is involved.

Make the fixes last through the year

A repair lasts longer when the cause stays visible. Vacuum dusty door tracks, wipe seals and check that latches still meet cleanly. Test again at the season change and after major weather, because Melbourne’s cold fronts and Sydney’s gales can expose failures that warm, still days hide.

Keep ventilation grilles unobstructed and leave a clear path to the roof space, but do not enter an old roof space without checking for asbestos and other hazards. Store tools and ladders safely, and keep access routes free for trades. These habits turn a one-off patch into a repeatable household routine rather than a recurring surprise.

Begin with a ten-minute inspection of the room you use most. Turn off nearby fans, test likely gaps with tissue, and write down one observation, one next action and one item for a qualified trade. The site’s general information hub offers a straightforward starting point for general household information as it develops.

Make the first repair small, safe and specific, then retest under the same conditions. Move room by room, keeping the notes you will need for future maintenance or a conversation with an agent. Start with the loose sweep or failed window seal that explains the airflow you have observed.